欢迎访问南通华林科纳半导体设备技术有限公司官网
手机网站

湿制程设备制造商


--- 全国服务热线 --- 400-8768-096
华林科纳产品分类 Products
400-8768-096
联系电话
联系我们
扫一扫
QQ客服
SKYPE客服
旺旺客服
新浪微博
分享到豆瓣
Products 产品详情
产品名称:

Single cavity vertical dryer -CSE

上市日期: 2018-01-02

 

Single cavity vertical dryer -CSE

Application of CSE cleaning system to various cleaning and drying processes

 

Advantage

CSE cleaning system is applied to various cleaning and drying processes

Different configurations (devices that can be placed on desktop operations, single independent, double chambers)

> > for wafer size to 200mm

> best area, equipment with rollers can be moved

Superior reliability

Unique modular structure

> it is extremely easy to repair

Easy to use and operate

 

The cleaning and drying machine is equipped with two kinds of automatic and manual systems. It is capable of complicate and different process requirements. Its stability and ease of operation will bring additional economic benefits to any factory. RinseSte can handle wafers of different sizes. The software program that studies the design makes the operator get the best control.

The cleaning machine is one of many industrial partners who seek economic benefits through the pursuit of productivity, stability and ease of use.

A good choice, the standard configuration of the equipment is fully capable of realizing the cleaning and drying process of all the ordinary wafers on the market.

4.png

Characteristics and advantages

 

application

After a variety of process cleaning

General characteristics

> > applies to the diameter of the wafer to 200mm

25 wafer single box process

Standard high edge and low side basket

Optional built-in resistivity detection sensor to control the cleaning process of wafer

Using cold or hot N2 to assist the wafer drying

It is easy to replace the centrifugal head

 

Graphical interface

Color 5.7 "touch screen based on PLC

> can edit more than 10 menus, each menu can have 10 steps

> multilevel user density

 

General installation parameters

Size: according to customer configuration requirements (long x wide x high)

Rated voltage: 230 VAC

Rated frequency: 50 Hz / 60 Hz

Rated current: 1 x 16 A (etc.)

Train

Operation, maintenance, process training

 

option

> the electrostatic device is installed in the process chamber area

Deionized water recovery

Resistivity monitoring device

Automatic loading of mechanical hand

> equipment for table operation, single independent, double chamber

> > SECS/GEM

 

Deionized water heating system

> base placement of stainless steel roller

Solvent extinguisher

> a flower basket for special design

 

More information about the dryer cleaning equipment, you can pay attention to the CSE website CSE (www.hlkncse. COM), now the hotline consulting 400-8768-09618913575037 can immediately get the relevant solutions for the dryer cleaning equipment

 

Hot Products / 热卖产品 More
2016 - 03 - 07
枚叶式清洗机-华林科纳CSE南通华林科纳半导体CSE-单片枚叶式洗净装置的特长:单片式清洗装置的优点(与浸渍.槽式比较)1.晶片表面的微粒数非常少(到25nm可对应)例:附着粒子数…10个/W以下(0.08UM以上粒子)(参考)槽式200个/W2.药液纯水的消费量少药液…(例)1%DHF的情况  20L/日纯水...每处理一枚晶片0.5-1L/分3.小装置size(根据每个客户可以定制) 液体溅射(尘埃强制除去)  (推荐)清洗方法单片式装置的Particle再附着问题   更多的半导体单片枚叶式湿法腐蚀清洗设备相关信息可以关注华林科纳CSE官网(www.hlkncas.com),现在热线咨询400-8768-096;18913575037可立即获取免费的半导体清洗解决方案。
2016 - 03 - 07
自动供酸系统(CDS)-南通华林科纳CSEChemical Dispense System System 南通华林科纳半导体CSE-CDS自动供酸系统 适用对象:HF、HN03、KOH、NH4OH、NaOH、H2SO4、HCL、 H2O2、IPA等主要用途:本设备主要用于湿法刻蚀清洗等制程工程工序需要的刻蚀液集中进行配送,经管道至设备;具有自动化程度高,配比精确,操作简便等特点;具有良好的耐腐蚀性能。控制模式:手动控制模式、自动控制模式设备名称南通华林科纳CSE-CDS自动供酸系统设备型号CSE-CDS-N1507设计基准1.供液系统(Chemical Dispense System System)简称:CDS2. CDS 将设置于化学房内:酸碱溶液CDS 系统要求放置防腐性的化学房;3. 设备材质说明(酸碱类):酸碱溶液CDS外构采以WPP 10T 板材,内...
2016 - 03 - 08
IPA干燥设备-华林科纳CSE南通华林科纳CSE-IPA干燥设备主要用于材料加工 太阳能电池片 分立器件 GPP等行业中晶片的冲洗干燥工艺,单台产量大,效率高设备名称南通华林科纳CSE-IPA干燥设备应用范围适用于2-8”圆片及方片动平衡精度高规格工艺时间: 一般亲水性晶圆片: ≤10 增加 @ 0.12 μm疏水性晶圆片: ≤30 增加 @ 0.12 μm金属含量: 任何金属≤ 1•1010 atoms / cm2 增加干燥斑点: 干燥后无斑点IPA 消耗量: ≤ 30 ml / run 设备制造商南通华林科纳半导体设备有限公司 www.hlkncse.com 400-8768-096 ;18913575037IPA 干燥系统组成: IPA干燥工艺原理 01: ...
2016 - 03 - 07
刻蚀方法分为:干法刻蚀和湿法刻蚀,干法刻蚀是以等离子体进行薄膜刻蚀的技术,一般是借助等离子体中产生的粒子轰击刻蚀区,它是各向异性的刻蚀技术,即在被刻蚀的区域内,各个方向上的刻蚀速度不同,通常Si3N4、多晶硅、金属以及合金材料采用干法刻蚀技术;湿法刻蚀是将被刻蚀材料浸泡在腐蚀液内进行腐蚀的技术,这是各向同性的刻蚀方法,利用化学反应过程去除待刻蚀区域的薄膜材料,通常SiO2采用湿法刻蚀技术,有时金属铝也采用湿法刻蚀技术,国内的苏州华林科纳CSE在湿法这块做得比较好。下面分别介绍各种薄膜的腐蚀方法流程:二氧化硅腐蚀:在二氧化硅硅片腐蚀机中进行,国内腐蚀机做的比较好的有苏州华林科纳(打个广告),腐蚀液是由HF、NH4F、与H2O按一定比例配成的缓冲溶液。腐蚀温度一定时,腐蚀速率取决于腐蚀液的配比和SiO2掺杂情况。掺磷浓度越高,腐蚀越快,掺硼则相反。SiO2腐蚀速率对温度最敏感,温度越高,腐蚀越...
Copyright ©2005 - 2013 南通华林科纳半导体设备有限公司
犀牛云提供企业云服务
南通华林科纳半导体设备有限公司
地址:中国江苏南通如皋城南街道新桃路90号
电话: 400-876- 8096
传真:0513-87733829
邮编:330520
Email:xzl1019@aliyun.com       www.hlkncse.com


X
3

SKYPE 设置

4

阿里旺旺设置

2

MSN设置

5

电话号码管理

  • 400-8768-096
6

二维码管理

8

邮箱管理

展开